ISOBLOK® AC Transient Protector
May 15, 2019Powerware® 3105 Series Uninterruptible Power Supply
May 15, 2019RICE LAKE LCP-1 DC Transient Protector
- Low cost, non-serviceable
- Effective series protection for strain gauge transducers
- Encapsulated circuitry ensures positive protection against fungus or corrosion on boards
- Two nylon strain reliefs for 0.187 in-0.312 in (4.7 mm-7.9 mm) diameter cable
Information
The economical LCP-1 DC Transient Protector can be used indoors or outdoors. It provides series protection for strain gauge transducers.
LCP-1 DC Transient Protection Specifications
Four-channel series type with separate shield
Maximum Excitation Voltage:
18 VDC or 18 VAC
Clamping Voltage:
75 VDC or 75 VAC
Clamping Time:
<100 nanoseconds typical
Peak Surge Currents:
5,000 Amps any line to ground and 5,000 Amps excitation to excitation
Maximum Serial Transmission Rate:
30 Kbaud
Grounding:
Through a .25 in (6.35 mm) lug to a 20 ft (6.1 m) insulated #10 AWG ground wire provided
Cable Fitting:
(2) Standard nylon strain relief for 0.187 in-0.312 in (4.7 mm-7.9 mm) diameter cable
Enclosure:
Chemically-resistant PVC. This device, for outdoor or indoor service, is not intended for washdown service (NEMA 4) or for submersion (NEMA 6). Optional NEMA 4X available
Operating Temperature:
14°F to 104°F (-10°C to 40°C) consistent with NTEP guidelines
Leakage:
7,500 MΩ minimum
Dimensions:
4.0 W x 4.0 H x 2.50 in D (103.2 W x 103.2 H x 63.5 mm D)
Warranty:
One-year limited