GoDEX DT2x Direct Thermal Printer
GoDEX DT2x Direct Thermal Printer
July 15, 2019
blank
POWERAMP CM Series Mechanical Dock Leveler
July 19, 2019

POWERAMP HM Series Mechanical Dock Leveler

Pit Style Mechanical Dock Leveler

When size does matter, choose Poweramp’s® HM Series heavy-duty mechanical loading dock leveler. With 29 inches of direct rear hinge support and a high-strength deck constructed of a combination of structural steel “C”  channels and “I” beams, the HM Series provides exceptional structural superiority for heavy-duty applications.

HM Series Levelers come in 6’, 6’6”, & 7’ standard widths and 6’, 8’, & 10’ standard lengths. Other lengths may be available. Standard capacities for the HM Series are 30K, 35K, 40K,45K, & 50K CIR (Comparative Industry Rating).

• Structural Steel Support Members
• Multi-Position Structural Steel Safety Legs
• Below Dock End Loading Control
• Extended Range Float/Hold-Down Mechanism
• Yieldable Lip Plate
• Cam Control™ Counter Balance Assembly
• Lip Drive™ Positive Lip Extension
• CleanSweep Frame™

• Lockout/Tagout Maintenance Strut
• Night Locks/Cross Traffic Support
• 3-Wheel Forklift Protection
• Lip Support Service Strut
• Working Range Toe Guards
• Grease Fittings
• B410-14 Laminated Dock Bumpers
• Made in the USA

Information

OPERATION
The Poweramp HM Series is a manually operated leveler. The dock attendant simply pulls the release chain at the rear of the platform. A Cam Control Counter Balance Assembly then raises the leveler and a fully yieldable hinged lip is automatically extended at the top of the upward travel.
The attendant walks the platform down onto the trailer bed. If the trailer bed is below dock level the attendant activates a second pull chain at the front of the platform during the walk down. Operating range is 12” above and 12” below dock level. The platform is designed to compensate for canted truck beds up to 4” and remain flush with the dock floor. An automatic release feature protects the device under extreme float conditions common when “air-ride” suspension trailers are serviced.

CONSTRUCTION
The HM Series is designed for heavy-duty applications and has a maximum Comparative Industry Rating (CIR) of 50,000 lbs. All Poweramp Levelers are built with a durable four-sided box construction. The use of structural steel C channels or I beams create substantially more deck support than other levelers.

SAFETY FEATURES

Dual pivoting cross traffic legs for multi position safety in the event of early departure.
Working range toe guards close off sides in the service range position.
Built in lockout/tagout maintenance inspection strut and lip support.
Lip keepers for cross traffic support and automatic night lock security against theft.

VEHICLE RESTRAINTS AND ACCESSORIES

For a safer loading dock, all Poweramp levelers can be equipped with a light communication system and vehicle restraints, which help prevent unexpected trailer departure from the loading dock. A Bar-Lift Safety Barrier is also available to prevent forklift trucks from driving over the dock edge.

HM Series Common Options:

• Vehicle Restraint
• Extended Lip Sizes (18” and 20”)
• Weather Seal (Brush or Rubber)
• 3-Wheel Offset Forklift Protection
• Full Range Toe Guards
• Dock Lights
• Foam Insulated Deck
• Dock Alert Light Communication System

Model – Nominal Size:

• HM66 6’ x 6’ HM6510 6’6” x 10’
• HM68 6’ x 8’ HM76 7” x 6’
• HM610 6’ x 10’ HM78 7’ x 8’
• HM656 6’ x 6’ HM710 7’ x 10’
• HM658 6’6” x 8’
Capacity Range 30,000 – 50,000 lbs.

Replacement Parts

Replacement parts can be purchased through Weighing Technologies. Please call us at (281) 474-5277 or fill out a request online.