RICE LAKE Mobile Group Livestock Scale – MAS-M
- Rubberized deck
- Enclosed scale includes two standard gates
- Rugged all-weather powder paint
- Low deck height of only six inches, when in weigh mode
- 12 volt battery pack (recharged by tow vehicle)
- Integral air pump to lift and lower air bag suspension
- Electric brakes
- Can be used on any firm surface up to 6% grade
- Junction box for load cells
- Rubber strip on entry and exit flooring
- Solar panel charger for onboard battery
Information
Built with the physical demands of remote weighing in mind, the MAS-M livestock scale provides Legal for Trade measurements even when the scale is placed off-level by up to four degrees (or 6%). No other model brings as much flexibility to Rice Lake Livestock Scale performance.
The scale employs an independent air ride suspension which allows it to be moved in and out of weighing mode by simply adjusting the air pressure in the air bags. Load is applied to and or removed, from the cells through a manual lift/lower lever system.
Rice Lake’s Onboard weighing design is ideally suited to the unpredictable conditions of multi-site use. The Mobile Group Animal Scale is capable of providing Legal-for-Trade weights in locations where the scale may be off-level by as much as four degrees. In addition to the scale’s ability to meet the physical demands of remote weighing, the instrumentation package that complements the scale provides a complete report for each batch and lot of cattle weighed.
When the scale is in weigh-mode the deck is only six inches off the ground. The low profile of the weighing platform makes loading and unloading livestock quick, easy and safe.
The Mobile Group Livestock Scale includes transport wheels, lift system, and folding hitch. Optional pen siding is available to enclose the bottom three feet of pen. Enclosing this area improves animal handling and safety. Optional brakes, lighting package, air pump and instrumentation are also available depending on your individual needs. Various sizes and capacities are available to meet your specific weighing requirements.
MAS-LM Specification
20,000 lb
Inside Dimension:
(L x W) 12 ft 2 in x 6 ft 6 in
(L x W) 14 ft 1 in x 6 ft 6 in
(L x W) 16 ft 1 in x 6 ft 6 in
(L x W) 18 ft 1 in x 6 ft 6 in,
Outside Dimension:
(L x W) 13 ft x 9 ft
(L x W) 15 ft x 9 ft
(L x W) 17 ft x 9 ft
(L x W) 19 ft x 9 ft
X-Lug or X-Plank rubber deck with steel I-beam construction
*Slab foundation is required
Racks and Gates:
Constructed of three inch steel main tubes; two inch steel support tubes
Two end swing gates with latch (Gates swing outward from scale)
Load Cells:
Single tool steel S-beam
Two-year limited warranty on the weighbridge
Two-year parts and electronics warranty
Approvals:
NTEP CC 94-126
MAS-M Specification
13 x 8: 15,000 lb, 5 lb increments
18 x 8: 20,000 lb, 5 lb increments
Axle Type:
13 x 8: Single
18 x 8: Tandem
(L x W) 12 ft 5 in x 7 ft 5 in
(L x W) 18 ft 2 in x 7 ft 5 in
Dimension with Headers:
(L x W) 13 ft x 8 ft
(L x W) 18 ft x 8 ft
Outside Dimension (with tongue length):
(L x W) 18 ft 8 in x 8 ft 6 in
(L x W) 24 ft 5 in x 8 ft 6 in
8 ft 3 in
Transport Mode Height:
12 ft
Warranty:
Two-year limited warranty
Approvals:
NTEP CC 99-091 Measurement Canada AM 4847
