Truck Scales
SURVIVOR® OTR Steel Deck
- Top access to load cells and junction box
- 75,000 lb capacity load cells and G-Force™ mount assemblies
- Junction box(es) appropriate for number of load cells utilized
- NTEP-certified, CC #02-003A1
- 90,000 lb Concentrated Load Capacity (CLC)
- 90,000 lb Dual Tandem Axle (DTA)
- Up to 270,000 lb full scale capacity
- Span deflection ratio (1:1100) for legal highway loads
- Three standard widths: 10', 11', and 12' (available up to 14', NTEP certified)
SURVIVOR® OTR Concrete Deck
- Top access to load cells and junction box
- 75,000 lb capacity load cells and G-ForceTM mount assemblies
- Junction box(es) appropriate for number of load cells utilized
- NTEP-certified, CC #02-003A1
- 90,000 lb Concentrated Load Capacity (CLC)
- 90,000 lb Dual Tandem Axle (DTA)
- Up to 270,000 lb full scale capacity
- Span deflection ratio (1:1300) for legal highway loads
- 6" thick concrete deck
- Three standard widths: 10', 11', and 12' (available up to 14', NTEP-certified)
SURVIVOR® SR Low-Profile Siderail
- Weighbridge modules for creating custom lengths
- 75,000 lb capacity load cells and pre-assembled mounts
- Junction box(es) appropriate for number of load cells utilized
- NTEP-certified, CC #98-011A1
- 90,000 lb Concentrated Load Capacity (CLC)
- Up to 270,000 lb full scale capacity
- Span deflection ratio (1:3100) for legal highway loads
- 8" thick reinforced concrete deck
- Three standard widths: 11', 12' and 14'
- Up to 42' section span
SURVIVOR® ATV Fully Electronic Portable
- Three standard widths: 10', 11', and 12' (available up to 14', NTEP-certified)
- 75,000 lb load cells and pre-assembled G-Force™ mounts
- Up to 270,000 lb full scale capacity
- Top access for electronics
- NTEP-certified, CC #02-003A1
- 90,000 lb Concentrated Load Capacity (CLC)
- 90,000 lb Dual Tandem Axle (DTA)
- Bolt-on backfill ramp bulkheads (removable for concrete approaches)
- End clean out
- 5-year weighbridge warranty
- Span deflection ratio (1:1100) for legal highway loads
SURVIVOR® PT Pit-Type Concrete Deck
- Three standard widths: 10', 11', and 12' (available up to 14 ft, NTEP-certified)
- One 2' x 2' square manhole opening
- 75,000 lb capacity load cells and pre-assembled mounts
- NTEP-certified, CC #98-011A1
- Junction box(es) appropriate for number of load cells utilized
- 90,000 lb Concentrated Load Capacity (CLC)
- 6" reinforced concrete deck
- Up to 270,000 lb full scale capacity
- Span deflection ratio (1:3100) for legal highway loads
- Up to 42' section span
Intercomp PT300™/PT300DW™ Wheel Load
- 20 mA current loop data interface
- Operates on six 1.2 Volt NiCad (standard) or alkaline batteries
- Battery life: Approximately 1500 charge/discharge cycles
- Battery duration between charges: Approximately 8 hours of continuous use before the scale shuts itself off. (These numbers are lowered by the use of the lamps or active current loop transmission.)
- Charging voltage: 11.5 Volts - 14.5 Volts DC. Protection is provided for accidental reversal of the charging connections
- Charging current starts at 300 mA and drops down to 50mA after eight hours
- Charging time: Eight hours if the batteries are discharged to the point of turning off the scale
Intercomp SW™ Deluxe Portable Vehicle Scales
- High visibility Liquid Crystal Display (LCD)
- Individual wheel weight, percentage of total weight on each wheel, LR and RF total weight plus percentage; RR and LF total weight plus percentages at the same time; plus all other possible combinations
- Storage of up to 100 complete setups including vehicle type and I/O number
- Built-in self-diagnostics
- Push-button zero
- Push button night-light
- Automatic turn off to extend battery life
- Low battery indicator
- Internal memory that recalls data of last vehicle weighed when unit is turned on
- Rugged, protective waterproof carrying case
- Each system consists of four weigh pads, cables, control box (with case), battery recharger, and instruction manual
Intercomp SWII™ Portable Racing Scales
- Display that shows any combination of wheel weights or percentages of weight: left side, wedge, etc.
- Easy to use automatic zero and keypad calibration
- High accuracy and repeatability
- Full 1-year warranty
- Units of measure: lb/kg
- Lightweight, low-profile weigh pads, 15" L x 157#34; W x 4" H
- Weigh pads have leveling feet and handles
- Large Liquid Crystal Display (LCD)
- Powered by six AA batteries
Send to a friend
Send to Phone
Send to Phone
Your text message was sent.
To opt out at anytime, send the word STOP to YP411 from your mobile phone.
To get a help message, send the word HELP to YP411 from your mobile phone.
Please try again
You must enter a vaild 10 digit U.S. phone number.
Send this business listing as a text message to a mobile phone.
Weighing Technologies, Inc.
281-474-5277
-
-
Terms: The recipient of this text message may incur charges depending on their wireless carrier. Not all carriers are currently supported